The Mini Lathe Workstation

There are three parts to the Workstation which can be purchased as a complete unit or individually. They are: the Storage Unit, the Shelving Unit and the Stand.

Two applications of use :

       1.   With standard OEM mini lathe stands, just bolt the station between the stand and your lathe with the bolts and rubber washers provided.   Then assemble your grid and accessories.

       2.   If you use a table top, just bolt the station to your lathe with the bolts, rubber washers and bottom pads provided.   Then assemble your grid and accessories.   Clamping or bolting station to the table is recommended.

Work Station Features:

          Heavy duty 1 1/2” square tubing frame with solid welds, painted and engineered to last a lifetime of turning.   Vertical height is approximately 3 ½’ above the lathe footprint.   Bottom legs are drilled to standard lathe widths and to allow some front to back positioning.

           

          The heavy duty grid-square wall, 3’ wide and 2’ high, using ¼”           chrome plated steel rods with a grid squares 3” on center which will accommodate a multitude of convenient accessories.

       2.   If you use a table top, just bolt the station to your lathe with the bolts, rubber washers and bottom pads provided.   Then assemble your grid and accessories.   Clamping or bolting station to the table is recommended.

Work Station Features:

          Heavy duty 1 1/2” square tubing frame with solid welds, painted and engineered to last a lifetime of turning.   Vertical height is approximately 3 ½’ above the lathe footprint.   Bottom legs are drilled to standard lathe widths and to allow some front to back positioning.

           

          The heavy duty grid-square wall, 3’ wide and 2’ high, using ¼”           chrome plated steel rods with a grid squares 3” on center which will accommodate a multitude of convenient accessories.